Onkyo TX-SR674S 7.1 Channel Up-Converting A/V Receiver Amplifier "amplifier standby mode" Questions

...take your unit to service . :) Your item has developed an fault to power amplifier . the CPU of the unit analize power suplie if working correctly if not goes in standby mode . needs care in a ...

standby mode. It is necessary to push the standby buttone several times. I thought the problem was in the microswitch, so I replaced it for a new one, but it didn't help. With all inputs disconnected,

...slowly like it is in standby mode. Hi Your amplifier is off but plugged in to AC socket Check this link http://www.bose.ie/IE/en/Images/Lifestyle%20SA-2%20stereo%20amplifier_tcm46-4089.pdf page ...

...standby mode during brownouts. When set to ON, the RV-8 detects low voltage levels or a momentary loss of power and puts the device in standby mode. In the event of a power brown out, the RV-8 will ...

...standby mode. All the fuses is OK. Please help ? Yamaha DSP-A2070 not working, and not power up in standby mode. All the fuses is OK. I download the service manual, but there was nothing in the ...

...amplifier, what does it mean? The amp has 7 LED's in total 4 whiteLED's provide back lighting the bi-colour LED white/ amber is the power/standby indicator (amber when amp is in standby mode) The two ...

...amplifier remains in standby mode When restoring the power following a power failure the amplifier returns to Standby mode and fails to switch on using the amplifier's On/Off power button. In ...

...standby would probably be the same i.e. due to amplifier protection circuits operating. You need to check out all the output devices and those resistors on every channel, even surround ones you may ...

standby led blinking, no sound Acording to the manual you have it in an invalid mode.

...Amplifier that is stuck in stand-by mode. It is a stereo system that I have stored for years out in my shed so it has been exposed to heat and cold. Prior to that it worked fine. Yesterday, I hooked ...