Panasonic PT-52LCX66 Projection Television "change blocked calls" Questions

Sony Grand WEGA KF50WE610 50 blue hue blue dots Sony Grand WEGA KF50WE610 50Sony Grand WEGA KF50WE610 50 blue hue at right corner and bottomblue dots throughout screen in pixels This model also has a ...

Have a Sony TV modelKDS-R50XBR1 and after changing Have a Sony TV model KDS-R50XBR1 and after changing lamp, started to see yellowish background . In web site some had mentioned that was caused by ...

down air flow blocked come up on screen and shutt down Call Mitsubishi they will tell you an authorized service center in your area to come out and change the thermal sensor in this set free of charge

...with adjustments for each picture tube. A sudden loss of focus is pointing to something else, a change in the high voltage. Poor high voltage regulation will cause a loss of focus. If your loss

blue streak at bottem of screen there is a blue streak a bottem of tv screen not all the time also at times up the middle of the screen Hello, You have the classic "blue blobs," In most of Sony's rear

JVC HD-52Z575. After changing the bulb the color in the mid portion of the screen is off. Maybe too much yellow. The color in the sides and top of the screen seem ok. bad optical block call jvc

We have bluish spots on our picture. It's not the lamp. We had them before and after we changed it. This is an inherent issue with the optical block of your TV. It was an design flaw in the TV that is

How do I reset the self check mode on a KDF-E50A10 I have a yellow tint or halo on my TV. I ask Fixya for help and the answer was to replace the Optical block and call Sony to see if it's under ...

sony dlp KDS-R60XBR1 changed projection lamp to see if this would get rid of the green everything. didn't work. Now what? This is an incation of optical block gone bad and it cost to me around $1200 ...

Yellow Screen on my Sony KDS-60R2000 Projection TV... The screen has a yellow/green tinge that cannot be fixed with manual changes via the picture menu options. Have reset to factory spec, checked ...