Mitsubishi WD-57731 57" Projection HDTV "put new lamp housing" Questions

...put new bulb in old housing. put everthing together correctly and plugged in and now red lamp light still comes on. From what I remember, when you turn on the tv, use the remote and when it asks if ...

...NEW LAMP STAUS LIGHT NEED TO REPLACE IT HOW MANY SCREWS IN BACK DO I NEED TO REMOVE TO GET TO LAMP AND APPROXIMATELY HOW LONG SHOULD PUTTING NEW LMP IN TAKE AND DO U HAVE ANY VIDEOS TO SHOW ME You ...

...put it in and my tv is not very bright. My question is what is the difference between lamps. what one is the best quality? the factory one that I took out was a osram. any thoughts? thanks Russ as i ...

...lamp box. Next take out the old bulb, put the new one in (be sure to use the gloves installing new bulb or else any finger oil will cause the bulb to fail when it gets hot) and reverse steps to

...New Lamp Cartridge 1. Do not touch the glass parts of the new lamp cartridge. Insert the new cartridge into the TV in the same orientation as the old cartridge. Push on the cartridge housing until it ...

put an ohm meter to the bulb it was an open circuit. I ordered a new one and it lasted 2 hours with the element exploding. Is there something wrong with the TV or are the bulbs junk? They are not from

...new lamps and the old lamp that went out. I'm wondering if it's something else or maybe the tv justs needs some kind of full reset. I also cleaned the vent/filter thing on the side of the tv. I even ...

...loosen the 2 screws and slide the unit out. Replace the new lamp and make sure u put back on cover, There is an interlock switch on the cover that keeps unit from powering up if cover is not

...new lamp housing and lamp in but it is still the same.also cleaned off the back side of the screen, but no results. any ideas? doe sit seem like there is a "glow" around lightly colored items on dark ...

...new lamp. So I had a look. Pulled the front panel, pulled the lamp. Noticed it was dusty inside and cleaned the filter and fans. The lamp didn't look fried. Stuck a meter on it and got no continuity. ...