RCA TruFlat 27F520T 27" TV "prong back" Questions

...prong is either red, yellow and white, and plugs into corresponding A/V ports on the back of the Apex TV and the back of your cable or satellite box. Make sure the ports and prongs are ...

prong side of the switch and put it back together. Works fine now with remote. Be careful as the set picture tube holds high voltage for a long time when unpluged. Unplug overnight and then work on it

...back and verify solder joints and there was no change. I have also done the old "vibration" check on the various boards but that makes no change in condition. I called around to some local repair ...

...up in the channels like you are holding the button down. I took the button board and clipped to prongs on the micro switch to the channel up button. It has three prongs on one side and two on the ...

My cord on my rca tv pronge broke off can i fix it Would not be difficult I assume you mean antenna plug? Radio Shack would have the fitting but you would likely have to pull the back cover off to cut

...the channel buttons on the top of the tv. You will need to figure out which one it is. It has five prongs that are soldered into the board three on one side two on the other. I clipped the two

...that appeared to be burnt up. what can i do? It is probably the on /off button.I clipped two prongs on mine and use the remote to turn it on and

...prong!!!!!!! My tv video-in got broke off when I pulled out the plugs and I cannot get it out with a needle or anything please help!!!!!!!!!!!!!!!!! well, if we're talking about the same TV, you can ...

VCR/DVD prongs broken off in TV The prongs that attach the wires from the VCR/DVD player to our TV have broken off in the TV part where they are to plug in. I moved our TV and VCR/DVD player and I ...

...back of the TV for it to work. Or - what else could be the problem. I got this at a silent auction for charity and my work said they tested them all before selling them to us. Please help. Hello Only ...