love my 36 incher- mine is 12 years old-and was only in the shop once-and still gives a better picture than the LCDs out there. I'm a member of SMPTE. society of motion picture and television enginers
...try to borrow a DEGAUSS COIL and with the set on, switch the coil on and by using a circular motion go around the screen of the TV moving backward slowly as you do it. When you are say 6 feet ...
...motion)the remote seemed to be working (without the led flash) but there was a delay off about 1 minute for it to take effect.i don't know if it helps but when i try switching it off then back on you ...
...on it, and rub in circles, if it's a longer scratch you can just use your finger. Rub in a circular motion for a few minutes. Clean it off with smooth cloth or tissue paper lightly moistened. Make ...
Question about Philips Televison & Video
...ok. The antenna is made my philips. I keep on trying to auto install and it goes through the motions but the channels aren't installed. I am left with: Favorite channel list is empty. You must ...
...on about 4 feet from the set and then bring it closer to the screen while moving it in a circular motion. Keep the soldering gun a few inches from the screen and circling it around the perimeter. ...
Question about Sony Televison & Video
...working set.If no error blinks you likely have a bad/poor solder connection that when the board where it is at gets hot OPENS as opposed to shorting---just like a loose wire but a bad solder ...
...fail to "rebound" or feel different from the rest. You can usually work the button in a 'circular motion" to release it. If the buttons seem normal , it's possible that the switch inside the TV has ...
...for demagnetizing you simply hold it close to the center of the picture tube and using a circular motion slowly spiral outward to the outer edge of the tube, pulling the magent further away from
Question about Sony Televison & Video
...television went into "slow motion" then the screen went black, the sound still works but nothing else this is an LCD with LED backlight TV Its D/A converter is faulty. Contact the authorized service ...
1,003 questions posted
Usually answered in minutes!
2,410 Questions
1,124 Questions
789 Questions
510 Questions
405 Questions