Kenwood DNX7100 Car Video Player "back camera working" Questions

...camera was taken back to the E1025 unit. I expected the orange wire (reverse) on the back of the unit was to let the UNIT know when the car was in reverse, thus displaying video from the camera. So I ...

...tie the camera wires pos, neg. into them and boom works. you will need a light tester from wal-mart. as well have a friend thro it in reverse for you when searchin for wires. (located on back up

camera still works and when i change operations eg from tuner to dvd the screen flicks back on for like two seconds. The touch screen still works as well. Any help would be greatly appreciated, thanks

camera but you can find a number of them from other makers that are just as good. If you will turn the key to the on position, unplug the wiring harness in the back of your dvd player. wait 30 seconds

...camera whenever I put my car into park / drive, but switches back to the source menu whenever I put it into reverse. So its backwards so to say. Any suggestions ? Reverse sensor wire not connected ...

...on the rearview camera. If so this could be your problem. The rearview camera comes on when you put the vehicle in reverse, turning off anything else until the vehicle is put back into another

...camera to show automaticly when i go to reverse and then switch back to my home blue screen when its not? any help would be greatly appreciated. It sounds like you may not have it wired correctly. ...

...camera...full time...rear view mirror and back-up monitor for the truck camper..." This is the pink wire that must be attached to the ACC of the vehicle's Ignition Switch. Alternately, it may be ...

...back up camera with provided details but it is not working. White wire is the only one that is connected to anything. Its named as camera 12v, but I provided power to back up camera through reverse ...