Cisco 504g will not power up When power on, nothing on screen, red mute key, green headset key & green loudspeaker key nothing else. Any advice how to fix? Plug out the cable from this and put in ...
Question about Linksys SPA Computers & Internet
has power and connectivity but no audible sound has power and connectivity but no audible sound cant dail out and when dailed nothing check if you have the ethernet cord conencted correctly from ...
How to recovery from boot loop? Cisco Phone powered up, then 3 lights on, next - off, cisco logo appears and Phone reboots again.. I think it'was after flashing new firmware. Are you familiar ...
...hole and (almost hidden) button inside from the back side of the device labeled 'RESET' Wile on power, use a pen and gently push the button. keep it for about 10 seconds. Now try to acces it. Do ...
Question about Cisco Computers & Internet
how to open cisco ip phone 7911g to troubleshooting not powering How are you trying to power the phone? It requires either a 48V Cisco Power Adapter or Power Over Ethernet from your switch in order to
how power need Cisco 7941G-GE IP Phone These phones can take their power from a Power over Ethernet switch, where all you need to do is plug the phone in to the switch and it gets its power from there
has dail tone no calls out Is your Magicjack plugged into the wall power thru a power module? Try plugging the magicjack directly into a USB port on your computer. If the magicjack work now, then you ...
Question about Cisco Computers & Internet
what is the problem with my cisco 7921 phone it has a blank screen Does the phone power on at all? If you hold down the red button on the front it should power on. If it is not powering on, either ...
Question about magicJack Computers & Internet
...call goes directly to my computer and I don't know someone is calling. This could be failure of the power adapter module. Is your Magicjack plugged into the wall power thru a power adapter? Try ...
Question about Cisco Computers & Internet
7940 cisco ip phone being powered by a power brick seems to loose power when connected to the ethernet. When ethernet is disconnected, power comes back. Ethernet works fine when phone is not connected
23 questions posted
Usually answered in minutes!
27 Questions
4 Questions
5 Questions
6 Questions
4 Questions