Question about Dacor Ovens
to know what relay is involved in powering up the bake element. What are the terminals to test Like DLB, BA and L2? http://www.uncleharrywizard.com/nephewclub/wizardrange/dacor/dacor-technical-manual-
...controls and microwave work fine. In my case the problem was the solder around the pins of the DLB relay heated up and melted away from the pin. I found this info on another post. I put more ...
...120VAC. If either one is out, you won't get squat for heating - the problem is most likely with the DLB relay or the bake relay on the relay board. (The element should ohm out between 20 and 40 ohms ...
Question about Frigidaire Ovens
CAN YOU GIVE ME A SCHEMATIC ON MODEL # FEB798CCSD, LIKE RIGHT AWY MY CONVECTION DLB.OVEN, IS SHUTTING OFF ALMOST AS SOON AS I PUT IN A TEMP. MY BAKING PART OF THE OVEN WORKS. WE HAVE A GUY HERE, BUT I
...which is comprised of 2 - 120VAC legs (240VAC is applied during bake). One 120VAC leg is from the DLB relay and the other is from the Bake relay. if either one is bad, or not energizing, you won't ...
Wont Heat at all It is on, and in any mode just displays 100 Dgr but it does not heat (Broil or Bake) Buy a new one Replace the board. The DLB is probably bad.
74 questions posted
Usually answered in minutes!
34 Questions
28 Questions
21 Questions
24 Questions
8 Questions
