D-Link Xtreme N DIR-655 Wireless Router "gateway login pass" Questions

...gateway you need to go to in your internet browerser. From here the setting will be different depending on the model of the device. Possible logins User: admin Pass: admin User: admin Pass: (blank) ...

...login=1&json=1&docid=b90128e4c5e547cc81cdcd13d42f1fc7_4755.xml Or Before following the steps in this article, check if your wireless computers have stable connection when connected to other ...

gateway address in a browser not on the network, it brings me to the dvr's login page.... All I want to do is be able to reliably view my DVR System remotely on my phone, regardless of where I'm at. I

...going to the gateway address for example, 192.168.1.1 which will prompt a login box that should have values pre coded. Once it logs you in, it should let you change it through administration

as far as the default gateway 192.168.0.1. Press and hold the reset button on the back of the router for about 10 seconds.  This will reset the router to default, then you should be able to login

pass code so wireless access is open not secured 1. Connect a computer to any of the four LAN ports of the Belkin Wireless router. 2. Open your web browser and type the router IP address of the router

...Gateway ... 192.168.123.456 Start Internet Explorer Enter http://192.168.123.456 Login to the web-server "inside" the router. Run the "Wireless Networking Setup Wizard" to set: * SSID * ...

...gateway address Type that into your browser and login with a combination of either admin, password, or root Somewhere in your settings you will be able to configure router security. If you can not ...

gateway ip is your router ip try with it. If you are still not able to access it then press RESET button for 10 seconds it is in back side of router .Then you can access it with above default ip. Then

...gateway,, and login Default user name = admin default pass = admin or password or keep it blank if you get in look for port forwarding, if you cant login.. then the username/password was set from ...