DEH-6800 Faceplate not closing flush, tilted up DEH-6800 Faceplate not closing flush, remains tilted up. CD, Tuner and iPod connections all functioning properly. Anyone seen this before? I have a ...
go in, then it shuts off, then if i click it back on, it lifts itself back up and brings the button flush to the faceplate but doesnt fully eject, then shuts off again. CD mechanism is defective. Need
Clarion cx609 smooth install BUT it doesnt fit entirely flush in my 03' toyota 4runner. There are about 1/2 inch gaps on either side. HELP This is a CORPORATE double din opening You must use a dash ...
...connection is in the back? if there is no black wire on the back (make sure it hasn't been cut off flush with the case), the the unit ground out through the case itself. I have the same unit. It is ...
Question about Kenwood Car Audio & Video
...AND SAFEGUARDING ITSELF. TRY CHECKING THE SERVO SYSTEM FOR THE FACEPIECE AND MAKE SURE ITS CLOSING FLUSH WITH THE HAD
Question about Kenwood Car Audio & Video
...on the front)? If it's in the back of the unit, will the unit still push back into the slot and be flush? Hi Sara, Kenwood is not very clear about this - but it appears that it requires the purchase ...
...radio and install your CAR KIT. Then slide your radio sleeve in the rectangular hole all the way flush and use a flat head screw driver and bend the tabs of the sleeve(Radio Cage) so that the ...
...the mast it self into the antenna housing where it will continue to rectract until it stops nearly flush with the fender . At the time it stops, you will hear it going bump, bump, bump a number of ...
...the metal cage that came with the stereo into the opening above the pocket. Ensure that the fit is flush with the pocket. Using a screwdriver, bend the metal tabs upward, which holds the metal cage ...
45 questions posted
Usually answered in minutes!
240 Questions
257 Questions
245 Questions
227 Questions
184 Questions