Pioneer CDJ-800MK2 Turntable "sound warped" Questions

control is not functioning and changing speed up and down. That might sound like a warped record as you describe it. You can try moving the controls and cleaning them with a commercial contact cleaner

warped sound on most records. Sounds like most records are slightly warpped, but when I took them back, they played fine on ALL other tables. It is very annoying. My best description is that it sounds

...sound warbly(warped). My tables are new. I've tried changing the angle on my needles from 0 degrees alll the way up to 20 degrees, with no audible bettermen, as well as changing my anti-skating and ...

...warped sound. After inspection i have found that all parts are in working order, however the actual table the vinyl sits on is warped so whenever it spins the vinyl move up and down giving changes in ...

...sound slow or warped. I just set it up again and took my albums out of storage - same problem. The albums have always been stored properly and I have over 100. So I am sure that there must be an ...

...sound warped? If they sound warped, check to make sure that your voltage setting is set correctly for your area (115V or 220V). This is a switch located underneath your turntable platter. Just make ...

sound like a warped album. The belts are usually very easy to replace. Usually just lift off the turntable or there might be a small clip on the center pin, then it lifts off. Replacement belts can be

music sounds warped. like it has a spot were it slows down. thanks Sounds like the belt is slipping, and needs to be replaced (this is a normal replacement item - like tires & brakes on a car). I ...

sound warped! What do I do? My speed control doesn't help, I've tried adjusting the weight of the tonearm, I've tried the anti-skate...any suggestions?? Hi CGS8021 Sounds like the belt is failing. You

Gemini tt-2000 direct drive. Turntable platter is visibly warped, wow unacceptable. Flutter is also bad, piano suddenly has vibrato. What can be done? This is a new unit, bought last year, but because