Pioneer CDJ-800MK2 Turntable "dj screw" Questions

...screw on the pop-up light cover is very tiny, so you have to be careful not to strip or lose. Make sure you use the proper tools. - OPTiC Technics Repair Videos Technics DJ Repair Technics Parts DJ ...

...screw location ( picture examples would help me alot) on realighnment of laser eye. It's not that simple. I would suggest purchasing a Pioneer Service Manual for this unit, as it has instructions on ...

error e-8709 i ve got a cdj 800 mk2 and a djm 400 mixer.i bought it in ireland..when i plug the electricity from the speaker to my cd desk it says e-8709.which kind of problem is it? i ve no got my ...

...that solves your issue, Ion isnt a very good dj product so something as simples as this could screw something up. try a fresh install and please let me know what happens and ill assist you from ...

...screw - and this sits on 4 ball bearings, with a very thin piece of sheet metal which keeps the ball bearings in place. If this thin piece of metal is damaged - more than likely indented - it causes ...

...screw underneath encoder cover. Platter still will not come off easily. Am I missing something? Nope, nothing to it. The platter is just held down by gravity. Take a mallet or a piece of 2x4 block, ...

...screw is stuck. Any suggestions on how to loosen it ? Thanks...Dj Mike Music PHX AZ. (remedy) ok you can take the whole tone arm (remove the screw under the tunrtable , the rubber and the hard black ...

...not carry over. There is nothing to screw or tighten. You can install a new SPINDLE - and it should fix it. But might not be necessary if you just swap your platters out. Good luck! - OPTiC DJ PRO ...

...screw, as those are machine calibrated, and once tampered with, almost impossible to get back to exact factory settings. We recommend replacement of the entire Technics tonearm. - OPTiC Master Tech, ...

cos the bloody platter won't budge!! Any Help greatly appreciated!!!!! Then you're real **** and no dj or producer or whatever . Take a a look at the platter, see any screws: unscrew them