Question about Audio Players & Recorders
...arm to balance correctly and apply the correct pressure to the stylus it doesn't really matter how the weight is attached does it? It might take a bit longer to set up correctly, but you might save ...
...arm. Here are three links which will describe how to balance it. Charlie http://stereos.about.com/od/systemsetup/ss/Turntablesetup_3.htm http://www.youtube.com/watch?v=IoIHn2g0398 ...
...arm is tracking too light. To proper set the tracking weight on most units you need to zero the arms balance so that it is balanced just at the surface of the record. Once that is done using the ...
Question about Crosley Audio Players & Recorders
...arm balance adjustment in the user manual, however that is what needs to be done. At the rear of item #39, on page 10, is there a dial with numbers from 0 to 4 or 5? If so, set the dial to "0" to see ...
Question about Technics Audio Players & Recorders
...control to "0" should virtually eliminate the drift you mention when the arm is in neutral balance. Also make sure that the whole unit is level as this may also affect the arm's tendency to
...arm in balance / floating level, 2. adjust the weight at back to allow the cartridge to fall, little by little, until it does not jog. 3. then adjust the counter-balance bias, little by little if you ...
Question about Technics Audio Players & Recorders
...arm needs to be balanced correctly as well. Based upon your description, the tonearm may be too light. I think that the standard weight is about 1.5 grams. There should be both a rough and fine ...
arm balance. This is a device that you place on the turntable and you rest the stylus on a plate which is marked in micrograms. You place the stylus exactly at the correct weight marking and then make
...arm balance. this is usually done from the back of the arm where the counter balance sits. Cartridges have a STATED tracking force usually in grams. Most arms are roughly calibrated to weight but not ...
Question about Kenwood Audio Players & Recorders
...arm balance setting if it is the correct stylus. Does your arm have a sliding balance weight at the rear of the arm? If so you can slide this slightly towards the cartridge to regain the correct ...
78 questions posted
Usually answered in minutes!
169 Questions
146 Questions
83 Questions
90 Questions
69 Questions
