Celestron NexStar 5 SE (300 x 44.45mm) Telescope "azimuth" Questions

Azimuth Drive failure on Nexstar 114 I was recently in Big Bend, TX with my nexstar 114. The sky was great but the azimuth drive failed during viewing, The elevation drive works fine. What would be ...

...meade ETX 105 pe I can get the scope to move Alt motion with the controller but it wont move in the Azimuth position with the controller. Might I be doing something wrong This can be caused by 4 ...

looking for an Azimuth lock screw for the Tasco I am looking for an Azimuth lock screw for the Tasco 66TR Telescope From many dealers and possibly at your local well stocked hardware store. http://www

replacement part for alt-azimuth The alt-azimuth for tripod is broken. Would like to obtain a replacement. If you know the make, model and part number, have a look on Ebay - otherwise contact the ...

The azimuth adjustment keys don't work The azimuth adjustment keys (left and right arrows) on my grandchild's Celestron Nexstar 5SE telescope recently stopped working. The altitude adjustment still ...

the Azimuth Dial isn't firmly attached cause altitude cannot be fixed to an angle I am stuggling with fixing the Altitude. the problem is that, the Azimuth Dial isn't firmly attached, there is a ...

no azimuth motion my nexstar 80 GT does not move in azimuth when I can hear the motor turning Contact Celestron here: http://www.celestron.com/c3/page.php?PageID=37

Azimuth (horizontal) control gear is stripped. the part (looks like a hard plastic gear) that allows for the azimuth (horizontal) coordinates is stripped. Therefore, only the altitude (vertical) ...

...any ideas as far as trouble shooting this? thanks for any feedback....... chuck Be sure that the Azimuth Axis is Lock, you migth want to try and move the telescope in the Azimuth to make sure it

My daughter broke the azimuth yoke phlange, which fits into the receptcle and secured by the azimuth control knob. Can I purchase a replacement part? If so, where? (part G in the manual- 200x 60mm ...