Technics SL-1200MK2 Turntable "fuse 1200" Questions

...1200 was sitting on the carpet for a week in arizona and now does not turn on? Check the fuse underneath the platter. You'll have to remove the protective cover to access this area. If your unit has ...

...1200 turntable. Take the bottom off the turntable by removing the many screws in the bottom while the turntable is placed on a table upside down in front of you. After getting all those screws out, ...

...didnt next day ive seen a few other pages on here where the same has happend and ppl asked about fuses now the fuses are fine so wat do everyone suggest i do. thanks heaps throughing it away! only ...

power switch not lighting and turntable wont work Most likley the 250mA fuse (F1) on the power input circuit board under the platter

...1200 mk5 is blowing a 125V 250 mA fuse on the board just after the transformer There must be a shorted power transistor in the power supply area. Check the voltage output of the transistor to ...

technics 1200 mk2 just powered down and wont come back on THERE ARE FUSES UNDER THE PLATTER AND BLACK COVER,REMOVE GLUE FROM AROUND REGULATOR DRIVER TRANSISTOR ON PCB.

No power. Last saturday I pressed the little button for the light to pop up. When it did, the entire turntable lost power and wouldn't turn on anymore. It's basically dead now. Even plugged in and ...

...fuse problem I bought a technics Mk5 1200 in america, they woekerd just fine, they told me that they should work in europe with 220 v but when i plug one the red light when on and the i hear a clap ...

1200 no power tried another cord same no power changed out fuse with same amps and volt from radio shack still no power so im stuck help please. You need to use a ohm meter (you can get one cheap) and

...and I would suggest seeking professional assistance. You might also want to take a look at your fuses, which are located on the left side on a smaller PC board. If you don't see any fuses, then ...