Technics SL-1200MK2 Turntable "adjust arm" Questions

arm skates across the record when it's placed down. You need to adjust the downward force by adjusting the counter weight which is on the back of the tone arm. Rotate it so it's closer to the tone arm

...running smothly through the track?? please help Have you given the deck a service lately? Have you adjusted the horizontal elevations? Have you adjusted the counter balance arm? Once the horizontal ...

adjust tone arm I need to adjust the initial tone arm stopping area where the tone arm sets down to play the record. The tone arm sets down on the edge of the record and then falls off the record edge

arm or perhaps a lever near it. You owners manual should really explain all this and give the recommended tracking weight in grams and fractions of grams. Each weight is different for different styli.

...down the middle of the tone arm base and a set screw keeps it from moving. To adjust arm height locate screw, loosen and move the arm up or down to desired height and reset the screw in base of

...knows whats causing this and How can we sort it out ?? This table should have an "anti-skate" adjustment. This is out of adjustment and putting to much tension on the arm. This adjustment is ...

...arm is returning to rest about half way through the final track of each side. Any suggestions? The adjustment for auto return position is normally at the tone arm base on the left side under a

I have an old Curtis Mathis direct drive turntable that I bought in 1984. The arm needs to be adjusted so that it will line up with the 33 rpm record. It currently lines up about 1/2 inch outside of ...

...adjust the height of the arm,which you do by turning the big black dial on base of the arm(which you may have to unlock,with the little arm type knob),to much fluff in the groove will cause arm to ...