Question about Yamaha Audio Players & Recorders
No sound when connecting optical cable from set top box to #4 optical input for cable tv on rear. The cable only works from the front input or the dvd input on the rear but that limits my sound fields
Question about Onkyo Audio Players & Recorders
input? Try some troubleshooting to check whether its the turntable or the the receiver. What happens if you exchange the output cables of the turntable from left to right. Does the problem shift? Does
H/P Input No sound. Unit cycles between H/P Input On (no sound) and H/P Input Off (sound) Hey Jim MacRae,Follow my tip for sound issue in lap and desktop systemsHow to troubleshoot if No Sound In ...
Question about Sony Audio Players & Recorders
My receiver has been in the box since new. I just hooked it up for the 1st time and I cannot seem to get the unit to see the digital input (which is suppoed to be automatic. Vincent Check your ...
Question about Insignia Audio Players & Recorders
insignia stereo reciever inputs stopped working my aux input used to work if i hooked up an RCA cable from the aux to my computer. sound played through speakers, volume control on the stereo. now none
...input. Make sure you use the correct cable to make the connection. For newer receivers, the connection will likely be either HDMI or component. If your receiver has an HDMI output, use an HDMI cable ...
Inputs locked I setup my sony str-dg510 and some of the input are saying that i have to unlock them How do you so that? The word UNLOCK may appear in the display if there is a problem receiving a ...
...my Denon receiver. Can you help troubleshooting? was it working before hand? if so i would say you have burned out a curk/im sure you have checked all cables try switching from digital input to ...
kenwood vr-5900 no sound my receiver no decoder for input coaxial or optical, not sound for analog input, no sound for digital input.. Check you settings on the receiver. get into the menu of the unit
...troubleshooting on your receiver, Check if master volume on the surround levels are too low. Adjust master and surround level. There may aIso incorrect selection of the input source. Select the ...
123 questions posted
Usually answered in minutes!
135 Questions
101 Questions
78 Questions
82 Questions
73 Questions