dark picture on wega lcd I have a WEGA kdfe50a10. It's about 5 years old. The picture is getting dark. still visible but hard to see. I have the bright on full. Can hardly see picture in daylight. Is ...
work on TVs safely without getting zapped. I am just terrible at troubleshooting TVs. Thank You. The most common problem with this set in the start up circuit of the power supply. There is a resistor,
popping noises and no picture or sound I had the tv on this morning and all of a sudden it blacked out and made some popping noises. Then the blue power indicator light kept blinking. I unplugged it ...
...dim/bright, have to unplug set to start this same scenario over again. Never develops HV or audio, Will order the service manual today, but would like to know if anyone has seen this before (should ...
...dim and half bright Solutions: The problem is cause by defective LCD Panel.It needs to be replace. If the PSU is running ok and there are no any leds glowing on the front check to see it the ...
...dim and fluctuating) is almost certainly a bulb on the verge of failure. cost details : $750 DMD board , $250 lamp as i think DLP is gone ... just have a check correctly wit technician before ...
...dim, I turned the projector upside down to check the model number and the encrustation fell off the filament, restoring the lamp to almost-normal brightness. Removing the lamp housing to inspect the ...
71 questions posted
Usually answered in minutes!
1,423 Questions
661 Questions
252 Questions
240 Questions
221 Questions
