Question about Sony Televison & Video
...red light blinking 5 times, please. Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit ...
Question about Sony Televison & Video
...red blinking light on the standby/ power. What does it mean A 4 blink error means that you have a fan issue. Make sure fans are not clogged with dust or debree. If fans are free of debree ...
...red with the six blinks. Arox. one year ago this same thing happened and the repairman replaced a fuse. I have searched the large panel borads in the rear back corner of the unit and the only fuse I ...
red light flashes 3 times, then nothing, then another 3 flashes, then nothing, and so on Four blinks denotes a fault with its main board. It will be best to contact any service technician in this case
...red wire going to the front of the tv. I'm not sure how to unhook this to remove the board for repair. Thanks jaybirdwv OK, here is what I suggest you do----remove the light box from the set and ...
Question about Hitachi Televison & Video
...red and blue lights flash for about one minute and it will turn back on. model number is 50vs69a These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time ...
Question about Hitachi Televison & Video
...blinking lights and when I turn off the tv the lamp light stays red. Help! Give me some advice so when I do have it serviced and it comes back I'll know they did the right thing. KIT10 $29.50 Repair ...
Question about Zenith Televison & Video
...BLINKING THEN TURNS RED (OFF) Check the below linked site for more details about the blinking codes. Blinking codes and fault location procedure to many brand TVs are given.If you wish to get more ...
blinking red light I was just wondering my akai tv turned on once and i tried to turn it on again and it wouldnt turn on...You can hear it turn on...but nothing..theres just a red light by the power .
Question about Sony Televison & Video
red then TV shuts off. the standby light blinks 2 times Can you help with this problem. These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON
232 questions posted
Usually answered in minutes!
1,430 Questions
874 Questions
716 Questions
647 Questions
601 Questions