Question about Samsung HL Televison & Video
...4 years. Replaced lamp, new on... Lamp went bad after 4 years. Replaced lamp new one immediately blew. Put in another lamp and the tv comes on for a few seconds then shuts off. power board ...
Question about Samsung HL Televison & Video
New lamp and still blinking lamp light.fan running fast and pulsing turns on and off and temp light blinks when using remote no light from lamp MIne did the same thing, thought it was the lamp, bought
Question about Samsung HL Televison & Video
...new lamp. You might ask yourself, How could this be if it worked with the old lamp? Well the old lamp didn't have all of it's gases, like it used, when you recently purchased the tv or lamp, and as ...
...new lamp for sure, but i suspect the ballast is bad too. can a bad ballast damage the new lamp (i don't want to buy a new ballast without knowing it is bad for sure)? The transformer can't damage the ...
...new lamp since I do not know when and if you have ever replaced the lamp. If you have never replaced the lamp then it is time for a new one. If after replacing the lamp and the set still shuts down ...
...new lamp assembly. Even after putting in a brand new lamp, the on/off issue was still present although not as often. Eventually the tv resumed normal operation with the new lamp installed. Could I ...
Question about Samsung HL Televison & Video
...it be a bad bulb again? I would try a new lamp. Lamps have varying qualities & usage conditions may cause varying life spans.So, even though the lamp may be 1 year old I would try a new one
Question about Samsung HL Televison & Video
Now the only the lamp and timer light blinks but no picture. you need to replace the lamp and if you have , you now need to reset the lamp use timer, so that it can start the new timer on the new lamp
Question about Samsung HL Televison & Video
...new lamp). Remove the single screw from the lamp cover and then remove the lamp cover. Remove the lamp cover duct by holding the locker and pulling it towards you. Next remove the screw holding the ...
...it blew. I ordered a new lamp. Would I need a new color wheel too? Is that the reason for the noise? Chances are the lamp is the only problem. But there is no way to know until it is replaced. ...
43 questions posted
Usually answered in minutes!
445 Questions
373 Questions
297 Questions
280 Questions
244 Questions