Radio Shack Pro-97 Handheld Scanner "fix squelch" Questions

...squelch potentiometer. R-139 is immediately behind the pot & R-138 is next to R-139. All I had to do is remove the 4 screws on the back of the case & the unit splits in half. I clipped the old ...

the audio voice only whispers but the squelch is loud how can i fix it. The volume control makes the voice loud, not the squelch. Turn up the volume.

...a police scanner the squelch stays on all the time wont scan how do I fix that Try turning the squelch real slowly, most of the time its counter clockwise until it goes silent, hope this was

...squelch but voices only whisper what is the problem and how can i fix it. Thank You Lyman frequency may not be accurate. get the correct frequency your tuning in to. could be off a few digits. then ...

...keeps hissing. Any ideas? Got the same issue man, you fix it? im checking mine over now, will let you know if i fix it. if you still need it. turn the squelch knob to the middle of the min. and

...programmed but it sounds like the squelch is to high all the time Uniden wont admit it but it has installed faulty squelch on the 248's I had the same issue. Wont sell parts either. 60 bucks to

...fix it, and all it all worked befor but now it's the Squelch Hi, my name is John. Check your antenna, try a different location, make sure it is still programed on the frequencies you have in it, some ...

...gets bummped it starts making static and you have to hit it again to make it stop. how do i fix this? Check your SQUELCH setting - that will make the 'hiss' sound if it is turned too far or

...squelch set at it broadcasts static fuzz. Is there some easy fix I am missing or is it shot?? Thanks for the help in advance The volunteers at FixYa don't like to respond to questions like yours ...

squelch.I tried resetting but did not help,any suggestions? help I know what you mean! i have the same issue! it still picks up the chatter on the frequency but its not cutting out the whitenoise aye!