...that the polarity matched. Some have the pinpositive, the other the sleeve. It is UNLIKELY that muchwas damaged beyond the power regulator in the base unit. Should be relatively inexpensive
chuck for a Clarke hammer drill i cannot findthe chuck for my clarke hammer drill , will any 1/2 inch chuck work? Any 1/2 chuck with the same base on it. Are you sure you need the chuck or the chuck ...
Question about Drills
...18 v - POWER BASE EXCEL DRILL charger . Please help to locate the charger from some store ? B&Q www.ebay.co.uk/bhp/powerbase-battery ...
...power pack that attach's to wall socket and charger base, see what input it can handle, some gear can handle like 110v-230v, others cant ie will read 120v Any adaptor that puts out the same output as ...
...power pack that attach's to wall socket and charger base, see what input it can handle, some gear can handle like 110v-230v, others cant ie will read 120v Any adaptor that puts out the same output as ...
...power and rotate very slowly and the trigger gets hot very quick and at the base of the battery it makes noise , the battery pack works fine cause am using it on another drill,its new but i live in ...
...it after you are done. Usually, the light on the charger is just an indication that it is powered
Question about Drills
...determine the input voltage (120 vac?), determine the output voltage (14 vac?), determine the power requirements (output voltage times the charging current), find a transformer at ...
Question about Makita Drills
...base or the battery placed a battery to be charged in the charger and both the red and green lights are flashing may be batterty take both to a specialist battery shop and get them tested The most ...
...power cord going into the drill base. You should check first using multitester, the voltage that comes out of the drill charger. if the stress is normal in accordance Battery voltage required by the ...
26 questions posted
Usually answered in minutes!
227 Questions
165 Questions
118 Questions
74 Questions