Question about Ingersoll Rand Tools & Hardware - Others
At the start up ,the compressor start on first "star' and on second stage on "triagle" and after the normal compressing cycle start .At that moment the motor suffer and stops mechanicly
Makita Model 2012nb Planning 3 &4 ft. red oak boards Planning starts and stops At each start/stop a blade burn or gouge results Also on occasion, there is a loud knock This same problem occurred ...
Question about Dremel Tools & Hardware - Others
Dremel 400 xpr stopped while in use and started to smell like it was burning. It would not start back up again its a comon thing with a dremel to just burn out in use iv got through 3 of them all died
Question about Ingersoll Rand Tools & Hardware - Others
...that how to confirm/measure the cfm of screw conpressor that mentioned on capacities details? start with empty tank and stopwatch. start compressor and stopwatch. stop at certain value f.e. 5 ...
Intermittent running My tool is running stop/start. I have changed the brushes and brush holders thinking it could be that. I have checked lead switch, field coils. All ok. What could the problem be? ...
...if some one has changed it from the factory setting. There is a timer in the control box that starts counting down when the unit unloads. If it stays unloaded long enough for the timer to count ...
What does alarm start fault mean on the control panel on a ingersoll rand ssr ep-30 air compressor I use to start up a 25 HP Ingersol screw type compressor. The only alarms I got were from power ...
Question about Ingersoll Rand Tools & Hardware - Others
...stays on 'checking machine' after a power outage. How do I get it back to 'ready to start'? Installed new air end temp sensor, building power went out and since power came back on ...
Question about Ingersoll Rand Tools & Hardware - Others
My Ingersoll Rand UNI15-5-150-L rotary screw compressor only starts uo after trying to start between 10 and 15 times I regularly change the oil or add oil as needed and replaced the filter and the ...
...for the unit because the old panel had a burnt resisitor. The new panel was installed and wont start the unit stating the rotation is incorrect. The old panel starts the unit. The rotation is ...
197 questions posted
Usually answered in minutes!
35 Questions
27 Questions
32 Questions
23 Questions