Question about Sears LiftMaster Building Materials
...drive gear is not meshing with the worm gear it is because it is worn out. You'll need to replace it post haste. The part number is 41A2817 and is available at Sears or any good door opener service ...
Question about Sears LiftMaster Building Materials
...drive gear on Craftsman Garage Door keep stripping The nylon drive gear on my Craftsman Garage Doormodel 139.533SRT keeps stripping the teeth off of it. I have replaced it twice now. Once replaced it ...
Question about Sears LiftMaster Building Materials
...replace drive/worm gear. How can I change it. thanks, I have a 1265 and took the cover off (unplug first). There are screws securing the cover: 2 on each side at top, 2 at either end bottom. Then I ...
Question about Sears LiftMaster Building Materials
...drive gear. If this is the case follow the instructions below. You probably did not have the motor shaft pushed all the way back when you tightened the coupler after replacing the worm gear. Loosen ...
Question about Sears LiftMaster Building Materials
...drive gear twice Chamberlain garage door opener I replaced the drive gear last year and now it is broken again. I noticed the door was raising very hard a couple of months ago and that the rollers on ...
Question about Sears LiftMaster Building Materials
...replace a worn drive gear (Part No. 41A2817) for Model No. 1265LMC. I am not sure of the best way to proceed. complete gear/bearing kit $30, comes with complete instructions. I replaced the gear and ...
Question about Sears LiftMaster Building Materials
...drive gear broke on my mod.1265LM. Nead price, part no., and how to replace? Thanks Dave The drive gear part number is 41A2817 and the price for the kit is around $25.00. It comes with
Question about Sears LiftMaster Building Materials
...drive shaft nylon gear. I have replaced the shaft/gear assembly and motor shaft bearings in addition to adjusting both the lift and force settings. Why does it keep doing this? Your door is not ...
Question about Sears LiftMaster Building Materials
...UNIT CAN BE CLICKED IN PLACE TIGHTER. IS THE LIMIT SWITCH BEING DRIVEN BY THE GEAR ON THE DRIVE SHAFT?? IF THE DRIVE SHAFT IS TUNING THE LIMIT ASSY AND IT IS PROPERLY IN PLACE REPLACE THE LIMIT
Question about Sears LiftMaster Building Materials
...drive gear finally stripped. Is itt worth replacing the gear, or replace the whole unit. I am mechaically inclined, but can the gear be replaced while the unit is still mounted? Thanks I think buy a ...
5,971 questions posted
Usually answered in minutes!
0 Questions
