Question about Sears LiftMaster Building Materials
...not work All my garage door transmitter suddenly will not work. I tried reprogramming all transmitters but they still will not work. The garage door only closes and opens using the manual switch, not ...
Question about Sears LiftMaster Building Materials
not work , we changed batteries , nothing , reset the codes , nothing , only the original opener works , the other original does not work, nor the new one we bought, it is a genie pro Are you sure you
Question about Sears LiftMaster Building Materials
...works, one don't the remote that does not work is probably bad.orrr it might need the code reset to match the 1 that works.. I have a craftsman remote and one does not work after replacing the ...
Question about Sears LiftMaster Building Materials
...not work when the lights are on My garage door remote will not work if the lights are on. They turn off after 2 min. then the remote will work. Light bulbs located on the unit. I first thought I ...
...work, but not both of them. It seems that when I program the touch pad, my remote stops working, but the touchpad works fine. If I program the remote (and subsequently the homelink in the cars), then ...
Question about Sears LiftMaster Building Materials
...and billion code remotes they will not work with each other. Each works by itself but when you program one the other will not work. You need to make sure all your remotes are the same
not work. The vehicle door openers work, the opener on the wall inside the garage works and the outside keypad will close the door, but will not open it from the outside? Have you replaced the battery
Question about Sears LiftMaster Building Materials
...wireless key pad that you mount outside that I can not get to program. Any suggestions? the remotes are 9 pin and the remote states its from canida. The wireless keypad will not work with your
not work may have beem electrical storm. unit has power model 248739 I have Sears Craftsman model 139.58778 and the remote is suddenly not working for no apparent reason. The transmitter in the garage
Question about Sears LiftMaster Building Materials
...not work Lock pad and light pad work but not the operate pad.???? Try pressing and holding the lock button for 3 seconds to stop the light from blinking. Your wall control may be bad. Usually when ...
5,971 questions posted
Usually answered in minutes!
0 Questions