...adjustment to adjusting screw. Should I take chain off and try to get it back in the range it was in before and adjust screws back in the range they were? what is the solution to this problem?. My ...
Garage door will not open I just installed a craftsman chain drive model 553985, it will not open the door, it acts like it is trying to run the chain the wrong way. I believe it is installed properly
Question about Sears LiftMaster Building Materials
garage door doesn't open and close properly I had to adjust the tension on the chain of my garage door opener. Now the open and close settings are off. It closes too far and doesn't open far enough. ...
Question about Sears LiftMaster Building Materials
how do I adjust the chain on Chamberlin 1/3hp The chain adjustment is on the trolley. Don't over tighten. Some slack is necessary.
Question about Sears LiftMaster Building Materials
...chain adjustment? My door will not raise or lower. The motor is working but the chain may to be slipping possibly because it is loose? I can't see how to adjust it. Anyone know how to tell me what to ...
...Try turning the up limit back and see if the trolley will stop shorter. If it does, loosen the chain or belt so that you can remove if from the opener's drive gear. Bring the trolley to your ...
Garage door chain is sagging Sears craftsman garage door - it opened but when we closed the door the chain is now sagging. If the chain is adjusted properly the chain will sag slightly on one side ...
Question about Sears LiftMaster Building Materials
...it stops. Does not reverse. I adjusted the up and down limits to no avail It sounds like your chain needs adjusting. Try this. Loosen the chain enough so that you can remove it from the
Question about Sears LiftMaster Building Materials
...back to where the door would be closed and reattach chain. now open position will probably need adjustment leave door unhooked and just let trolley move in case it over shoots the mark either
Question about Sears LiftMaster Building Materials
the chain The adjustment for the chain is on the trolley. That is the part the chain and the door are connected to. Your chain is sagging entirely too much. Have you done any other work to this opener
5,971 questions posted
Usually answered in minutes!
0 Questions
