impact driver wobble What parts should I consider replacing to fix a drive wobble on my impact. it's not the bit holder, and it's at the point where a 3" screw is difficult to drive without stripping.
...impact driver and I can't hold a bit. How do I quick-fix this without messing anything up? Contact Home Depot or Lowes in your area, they should be able to set you up or at least put you in contact ...
...Impact Driver only works at high speed On Friday while installing composite decking on a very small porch, I was using my 14.4V Makita cordless impact driver which was working great until I got near ...
...its doing it or if it can be fixed? both packs are doing it.....wont charge up 90% or time, when they do charge it will hold it. same prob here, except its just one pack. mine is a 14.4 impact ...
...Impact Driver. I am unable to see how they fit onto the end of Driver. Is there an attachment made for this purpose? Thank You Gwyn You have to distinguish between Driver and Wrench. Driver has 1/4'' ...
locking mechanism came off my impact i pulled the locking mechanism on my impact to get the bit out and the bit didn't want to come out so i pulled the bit and the mechanism at the same time and the ...
I have an 18 volt 1/2" drive cordless impact wrench made by DeWalt and when I pull the trigger the motor runs but not the anvil? Sounds like you have a gear broke that runs from the motor to the shaft
...Impact Driver Kit Model BTD140 us the BL1830 battery, there are several types for it, 1.5Ah, 3.0Ah, 4.0 Ah. Maybe 5.0Ah battery for it will be available. And, the inside of the BL1830 uses the 18650 ...
...impact driver all of a sudden runs with extremely high torque making it unable to control the starting of screws without stripping the heads of the screws. this problem is all of a sudden and the ...
impact driver light stayes on all the time Makita says that is a switch problem, not easy to fix
98 questions posted
Usually answered in minutes!
104 Questions
75 Questions
18 Questions
14 Questions