Karcher 2500 PSI Pressure Washer "pull cord locks" Questions

Pull cord is locked. Was running fine and just Pull cord is locked. Was running fine and just shut off...When I tried to restart, I could not pull the cord to start engine. Any ideas? any oil in the ...

...cord wont pull I cannot get the cord to pull more than a few inches before it locks tight and will not pull any farther. won't start Try removing your spark plug, you could have fuel on top of the ...

pull cord getting stuck Pull cord is getting stuck on pressure washer. It started fine but suddenly stopped. When I try to pull the cord to start it again it has a difficult time turning the engine. ...

pull the cord without the plug in) Sometimes they get put in a truck and fall on their side and the cylinder fills with oil. The engine will seem "locked up". If oil is in the cylinder , just pull the

...pull cord. check the oil, is there gas in the oil? remove the spark plug and try to pull the cord again. gas may come out of the plug hole . if this is the problem you must change the oil and fix the ...

...pull with cord as well, but will lock up. Ran water to pump and pressure is relieved, but engine still only turns 3/4 rotation before locking up. Tried removing pump, but it is connected to the shaft ...

...pull cord won't extend First. Turn off the water....Release all of the pressure off of the hose and pressure washer. Try and pull again. If it still won't pull check to see if there is oil in the ...

...pull the cord with no load from the pump is the next thing you should do, with a few methods I have explained. Regards, M.G. If you remove the high pressure hose, do not try to start the engine. Just ...

...pull cord wouln't pull tryed everything but still the pull cord was in a locked position. Don't know what to do hoping you have an answer for me first turn off the water to the machine. pull the ...