Karcher 2500 PSI Pressure Washer "clean plugged nozzle" Questions

...nozzle it works fine until I release the trigger. Karcher (online) suggested I remove and clean the unloader which I did. It still doesn't work correctly. What another solution? cant get my pressure ...

13 HP honda shuts down after 30 seconds, already tried disconnecting oil pressure switch 1) check your pressure washer nozzle isn't partially plugged 2) the carburetor may need cleaning

...plugged. If you attempt to clean it be careful not to damage it in any way One thing I have found about pressure washers...you need to run water through the hose and everything until you get all the ...

...air that comes out..Make sure where the inlet for waters screen is not plugged..You may have to back flush washer to clean out or to unstick the pressure valve..Hope this helps you and have a great ...

...of the house turn on the unit and see if any water flows through. If not, clean the nozzle as it gets plugged up when not regularly used. Also be sure the REST button on the GFCI plug is pushed

...Iwant to know where the pressure switch is and if the motor has a fuse in it. If so where can i get the parts at. Thanks for any help you can give me. Clean out the Nozzle with a small diameter

...proper level is reached....let the unit sit for awhile until cool and then remove spark plug and clean it....i think it should be just fine....good ...

...of the carburetor and finally clean the nozzle. the spark plug may theoretically have a gem, clean and check for a visible and audible sometimes blue spark. and finally, just check the air

clean the bowls and probably the jets, but I'm used to Briggs and Stratton carbs. So how does Honda differ? honda jets thread into the main venturi where the float bowl bolt goes. you jut need a blade

...plugged just pull the line off where it attaches to the carb. If you spill gas, that is not the problem. Replace the line and be sure to clean up the gas. Sounds to me like a carburetor problem, ...