Question about Hitachi Drills
...drill works well until the last Sunday. When I drill a piece of wood in clock wise direction, I apply some force suddenly. It stops and after that I discovered that it can only works in anti clock ...
...reverse. Using the drill setting with the speed on 1 will give the power to free the bit. If the clutch will not engage, GENTLY but firmly switch between forward and reverse. This should work just ...
my 14.4 drill wont reverse directions does it have a reverse swtich if it has the worn gear may be worn out
Question about Drills
...tighten a drill bit. How can I loosen the two sections?? Hold the chuck and run the drill either forward or in reverse until the chuck is fully closed or open then reverse it while holding
switch for forward and reverse only opperates in makita 14.4 cordless drill.only works in reverse your transmission has gone out
...drill is stuck in forward and the button will not change to off or reverse. As soon as I put in a battery off it goes. Also one on the 14.4 drills will only go into reverse and offf too. Well burning ...
...drill gun does not reverse The reversing lever(13) may have popped out of the reversing lever on the switch, but more likely the switch is bad: The Switch part number is 23-66-0690 and costs about ...
...drill no longer works, the reverse switch does not move. You have burned out the drill motor, it is shorted, the battery smoked due to a direct short, one thing I don't understand why the thermal ...
works fine in forward but will not go in reverse Hilti SF 121-A battery drill. the drill was working both in forward and reverse but now will only operate in the forward rotation. Assuming that it's ...
...does not work in reverse What part do I need to replace in my dewalt 18 volt dw959 drill to make it work in reverse? It works fine going foreward. All other aspects of the drill are fine too!! Bob ...
16 questions posted
Usually answered in minutes!
29 Questions
20 Questions