Kidde Nighthawk Combo Gas/co Detector "power" Questions

Ad

too much power and now lorex camera wont turn on wires were cut so my friend tried to wire it directly to the same wires powering the outside motioin detector light, too much power!!!! camera wont' ...

Ad

panasonic wvl204 camera, how do i hook up the power supply? I need to know how to hook up a power supply to this camera. You will first need to have a 24v ac power supply. There should be 2 screw ...

Ad

Question about Samsung Home Security

1 Answer

...with 2 Clinton CE-VX30 Outdoor dome's, the 14 Viteks are using GV-TPCVPD Passive Video Power and Data Transceiver's and the 2 outdoor camera's are using Nitek VB31AT baulins. Any ...

Sony FD Trinitron WEGA Tv KV32FQ86E two flashing led Power on button pressed, relais is switching 2 times. Red LED is flashing 2 times, 3 seconds off, then again and againg until the TV's going well, ...

what power source do i use to hook up my samsung digital camera scc-131a This camera can operate on two voltages, either 12VDC or 24VAC. If you are using 1 or 2 of these the most practical and ...

...cut off plugs there are 4 wires coming out a black , red , white , and yellow what wires goes to power and what wires viedo ? INDUSTRY STANDARD WIRE CODE COLORS FOR CAMMERAS ARE AS FOLLOWS RED- ...

...connector off of my lorex mc7221 color night vision surveillance camera. I want to connect the dc power and put an RCA connector on it to plug into my tv. there are three wires coming from ca mera

Question about Uniden Home Security

1 Answer

Unit doesn't turn on by pushing power button Unit is not responding to power button to turn it on Check the power supply make sure it's connected properly then if plugged to an outlet you know works ...

Question about Dual Home Security

1 Answer

i have a accenta g3 house alarm when i have a power cut i cant turn the external siren off it dos'nt respond to the code power the system down (Mains power) then remove the battery power leave a ...

Question about SWANN Home Security

1 Answer

my SW248-LM8 Swann monitor stopped working. The display goes blank and the power LED slowly flashes from red to green. Disconnecting the power supply for several minutes and reconnecting had helped ...

Not finding what you are looking for?
Kidde Nighthawk Combo Gas/co Detector Logo

380 questions posted

Ask a Question

Usually answered in minutes!

Top Kidde Home Security Experts

Cindy Wells

Level 3 Expert

6688 Answers

Brad Brown

Level 3 Expert

19187 Answers

 Mikey
Mikey

Level 3 Expert

6904 Answers

Are you a Kidde Home Security Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...