my 14.4 drill wont reverse directions does it have a reverse swtich if it has the worn gear may be worn out
drill wont work only the light will come on. Is the drill draining the power or are both the battery faulty? Its happening with both batteries. Thanks in advance Dave Given the problems with Makita Li
battery wont charge my 9.6 v ryobi wont charge, i put in the battery and the charge light does not light up. there is a radio attached and it is working. That battery is shot and must be replaced.
the clutch wont engage No matter where I set clutch tensiion it will not lock in to work . Just slips. Brand new unit Sounds defective.. Bring it back for replacement or refubd
it wont work unless i shake it Check battery contacts or for broken cable contacts or a problem with short carbonbrushes.
Have became loose. If you Tighten them most likely wont fix it. You should contact Makita. If you do open the drill. The Clutch assembly will be a task to reassemble. And the warranty might be voided
batteries wont charge at all both lights blink signifying "malfunction"... wtf??? Batteries need reconditioning, but likely they need to be replaced if not new. If new, the charger may not be working.
xrp hammer drill missfires when i press the trigger ie sometimes wont work Clean and oil the tool inside and out!
Question about Drills
...not working i tried a new transformer by just connecting the wires but it still wont charge I have a charger for sale. My motor went out on my drill. No more use for the charger. ...
Question about Dewalt Drills
...drill was dropped 4 ft on floor. now wont work. time for a new one? no power after drill was dropped on floor. You can actually send it back to Dewalt and if it is still under warranty they will fix ...
86 questions posted
Usually answered in minutes!
227 Questions
165 Questions
118 Questions
74 Questions
36 Questions