Question about Makita Drills
...press the trigger the drill sometimes works but sometimes needs shaking or tapping to work.sometimes it stops during use and needs tapping again. The light always comes on when I press the trig ger ...
press so hard so the motor doesn't pull so hard. Let the drill do the work, and let it run at the set RPM. You will get more life from the battery and the drill motor. RIDGID PRODUCTS HAVE GONE TO THE
...motor shaft. It seems to be just a press fit. Seems like a flaw in design. I had same problem. I took my dw056 apart and took pinion off motor and pressed groves into motor shaft with side cutter ...
Question about Dewalt Drills
How to tell if its a battery problem or the motor is just wore out. runs slow all the time Richard, test your battery with a digital volt meter, charged battery will show close to or over 15 volts, ...
...motor shaft. It seems to be just a press fit. Seems like a flaw in design. I had same problem. I took the dw056 apart and took pinion off motor and pressed groves into motor shaft with side cutter ...
Question about Makita Drills
...press the trigger and don't work, only the light come on,I replace the trigger but I still have the same problem. I would guess that you have a motor issue. It maybe as simple as needing new brushes. ...
drill)by inserting the armiture, into the yoke.Both are magnetic and will fight one another , be firm, you wont hurt it.
Slip the spindle back into the brush holder, and re-seat the motor assembly,
86 questions posted
Usually answered in minutes!
227 Questions
165 Questions
118 Questions
74 Questions
36 Questions