Black & Decker String Trimmer Cordless 12" 18V "makes auto feed" Questions

my machine has a 'BUMP' feed auto feed head. What diameter line should I use please? Dave from Norfolk You do not give the make or model, but 1/16" or 1.6mm is common in domestic trimmers. .

...makes the automatic feed advance the string? the notice on the trimmer says it has an AFS Automatic Feed Spool, "NO BUMPING REQUIRED". I see that underneath the spool, there's a small plastic ...

...auto feed make sure that the small half moon inside clip is towards the center,put spool on making sure to get groves in the spool slot,and get line through hole.put on cap, on the auto feed the line ...

i have a ryobi 25cc straight shaft and the auto feed will not advance make sure the cord is wound on according to the arrows or anti clockwise.

...auto feed system is really poorly designed and produced. But essentially its designed to feed when resistance is made against the centrifugal force when spinning. Basically two ways. You start ...

spool not auto feeding on gl701 and need diagram of how to set it up correctly in strimmer When putting new line on, it must be wound clockwise onto spool. Make sure to use the correct size line. Jim

...auto feed make sure that the small half moon inside clip is towards the center,put spool on making sure to get groves in the spool slot,and get line through hole.put on cap, on the auto feed the line ...

auto feed doesn't work auto feed is not feeding the line automatically. Take the end apart and make sure the line is not getting bound up or is not over filled to where it can not move freely

...auto line feed will not stop feeding the line when in use. Did you ever get an answer to this problem? I'd like to know because I have the same problem with my cordless 14" Black N Decker Gass Hog. I ...

makes a trimmer that you don;t bump the head to feed the line, right? What make you ask this question? just check this out, it replaces the orig. head and all of Husq. have bumps unless you change it.