...cap with squeeze bulb part # 107512-01. Where can I purchase this. bring the saw to your local lawn mower repair shop. bulb is a easy one the oil cap bight be a pain.. see if you can find alternative ...
McCulloch chain saw Hard to start,,will not stay running,,,,oil cap will not seal 100% check the plastic tubbing in the gas tank might need to be replaced or the primmer bulb has a pinhole in it.
...cap and bulb assembly where can I get these parts? The good news is: Your manual containing a parts list can be found here: ...
...cap on top with the bulb, screws off. Use bar oil. Give the bulb a pump every 30 seconds of operation or so. This will keep your chain and bar lubricated. Regards, --WoobieDog-- According to the ...
bulb on the filler cap (before each cut). There is an OM available on the listing pn 530165784, $4.93. I think your saw was made by Poulan and is a model 1425 Type 2 but I cannot with certainty verify
...bulb.It's also the screw on cap for the oil reservoir. You fill that up with chainsaw bar oil,and as you use the saw every few minutes push the bulb down 2-3 times and it applies oil to the chain and ...
...mod. 106980-01. type LN1-2. Need new screw cap and bulb for chain oiler. You should be able to find it hear --- --> ttp://www.msservice.net/desa/remington.html Hope this helps ! rate me good
30 weight motor oil or bar and chain oil. Press the bulb on the resevoir cap 2x before each cut making sure the saw is pointed down and to the right to let the gravity feed oiling system work properly
...cap and bulb for your saw. If your oil cap opening is 11/16" #107512-01, #079084-01. If your oil cap opening is 7/8" the number is # 079084-02. Although msservice (first link), and Master Parts ...
...cap is opened it sprays gas and primer will not fill withgas The tank vent is a bronze plug inserted into the tank casting--the caps are not intended to vent. Check the fuel filter for plugging and ...
183 questions posted
Usually answered in minutes!
300 Questions
148 Questions
117 Questions
