Endless Summer gwt501a Open Flame Patio Heater "igniter" Questions

...clicks on, pilot glows, nothing happens. Then it repeats the above cycle & ignites. Possible bad igniter...igniter should read somewhere from 50-90 ohms. If not it is going bad. Remove igniter

How to install an igniter? I have a 1995 Coleman Evcon downflow propane furnace. How do I install the igniter? if the heater uses a hot surface igniter its a simple matter of unscrewing the igniter ...

When my furnace calls for heat the gas turns on and then the igniter should clicks to ignite the gas but it does not click. Does that mean that the module is bad or the igniter itself bad? The igniter

I have a 165000 reddy heater.I have fuel going in,igniter is glowing ,fan is running but it will not ignite. Now you may want to try to reposition your igniter closer to the fuel source. I have also ...

...and I think the ignition isn't working. I can manually light the furnace, just no ignition. The igniter seems okay--should I replace the circuit board, or is there anything else I should check? ...

...first thing you should do is make sure that there is ignition whether by spark plug or hot surface igniter. If you have ignition then make sure that you have fuel spraying from the injector located ...

dependable 92 ignitor igniter wont start glowing furnace clicks but the igniter doesn't come on check continuity on hot surface igniter. no measurable ohms reading = bad igniter. also insure 120v ...

rinnai gas heater not staying ignited following the normal start up process the heater shuts down once the ignition button is release after the heater appears to have ignited. It remains ignited and ...

Heter trys to ignite,replaced igniter,cleaned fuel filter Heter worked fine last year. Tryed to start this year and would not fire up. Replaced igniter and cleaned fuel filter, and photo eye. 1. Check

Goodman GMP100-3 igniter will not ignite I have a Gmp100-3 the igniter will not glow. the system wil try to start the fan starts there is a noise (that used to be when the ignitor woud start) i smell ...