2wire 2700HG-B Router (2700HGB) "reset wrt320n" Questions

3 pc's. cannot get two of them to access the router. used a flash drive to recommened by quick setup. nee help linksys wrt320n press and hold the router's reset button upto 30sec for reset your router

...wrt320n is connected to att westell 6100 modem. Check speed on modem is over 5 and only 2.6 when connecting router You can try changing the MTU size on the router to 1365. Open the setup page of the ...

WRT320N I cant remember password I need to reset password how do I do this? To reset your router to default settings and start over from the beginning, (if you are willing to do that) find the "Reset"

...wrt320n dual - band and when put the passwor and name to the network and try to connect with the router an error appears 302 and dont configure the router and my question is if there is no fix for ...

...reset my router Linksys WRT320N as i m unable to access through wizard There is a small reset button on the back side of the router, where you connect the cables. Press it and hold it down for 30 ...

router just flashes its lights Press the reset button for 30 seconds. Once reset the lights will flash for 30 seconds. If still after that lights are falshing then you can contact linksys as there is ...

...reset the modem to factory settings. Then you can use the default username and password for the system. linksys usually uses admin/admin, admin/password or no username and admin as the password. in ...

ip 192.168.1.1 no access You may have to reset router! This means hard reset which make it back to factory default settings and then you can access with that ip address. Hard reset is pressing the ...

can't obtain ip adress from the router or modem please reset the router for 30 seconds and try to login to page 192.168.1.1 by admin password

...WRT320N - Default password is admin. No user. There is a reset in the back if this fails. Hold it in till it cycles to clear custom settings. 2 Wire - No log in credentials by default. There is a ...