volume up switch may be bad. If the switch is open just enough to let some voltage through it locks up the microprocessor. Unless you have a multimeter and know how to check resistance on a switch you
...volume rises the more voltage going to the speakers so the more of an overload on the out-put IC. The output IC could also bee defective. My money would be on a bad output ic or a bad speaker or ...
...enough to pull the radio and send it back. If this is not fixable, I guess I won't be putting this radio in my other vehicles...had been thinking about it. Otherwise it works fine. Hi, To remove the ...
Question about Clarion Car Audio & Video
...volume the speakers sound like they fade in and out or cut in and out(don't know the terminology) and the led "pulses" with the bass. I do not have an amp hooked up to the speakers. The only info I ...
...enough to turn down the volume it would do it again right away. Of course on a boat, we were beached in a cove and the engine was not running when I encountered this. I searched the internet ...
...volume knob off the front of the face-plate. You may need to use a small screw driver to gently pry it up. Flip the face-plate back over and remove the one screw that's holding the printed circuit ...
...volume knob off the front of the face-plate. You may need to use a small screw driver to gently pry it up. Flip the face-plate back over and remove the one screw that's holding the printed circuit ...
18 questions posted
Usually answered in minutes!
76 Questions
61 Questions
67 Questions
54 Questions
46 Questions