Amana ARGS7650 Electric Kitchen Range "control board washer" Questions

Ad

Question about Kitchen Ranges

1 Answer

...control board thinks that the motor is locked up. A Hall effect sensor is used in these washer which monitors the speed and direction of the motor and then forwards this information to the control ...

Ad

Question about Kitchen Ranges

1 Answer

...control board thinks that the motor is locked up. A Hall effect sensor is used in these washer which monitors the speed and direction of the motor and then forwards this information to the control ...

Ad

Question about GE Kitchen Ranges

1 Answer

...control board on the motor. Its very simple to reset the motor board and see if that solves your trouble. This tip i wrote explains how to reset that motor control board. ...

...control board that is located in the back of the washer, is the Motor Control Unit (MCU), but it has nothing to do with the door latch mechanism. If you have questions about this repair, or need ...

...control board is blown out. The oven is totally separate from the top burners on a lot of units. You will have a separate burner control knob and then a panel for all the oven controls. The fact that ...

Question about Kitchen Ranges

1 Answer

...control board failure. Possible solution: Do not open door, select drain/spin to remove water, restart cycle. I also found a listing that says e45 is a bad control board. I would look inside the ...

Question about Amana Kitchen Ranges

1 Answer

...control panel to the range. The panel should pull out and down at the bottom. You will probably find the ears that hold the board have broken. Some of these models only used two screws to hold the ...

Question about Kitchen Ranges

1 Answer

...is no power to the water inlet valve on maytag mtw5740tq0 washer what could the problem be Hi,If you are not getting power then a relay on the main control board has gone bad...replace ...

Amana tandem 7300, code f3e2 temp switch,put in a new one & new control board..still throws same error code.???? Amana Tandem Washer is blinking f3e2 error code, what does that mean

Question about Kitchen Ranges

2 Answers

...Control Board then the board will have to be replaced. Hello Paul Here is what the service manual for the F28 say and what to check after reading it i'll explain what doesn't seem easy to ...

Not finding what you are looking for?
Amana ARGS7650 Electric Kitchen Range Logo

25 questions posted

Ask a Question

Usually answered in minutes!

Top Amana Kitchen Ranges Experts

Paul Carew

Level 3 Expert

3808 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you an Amana Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...