D-Link RangeBooster G WBR-2310 Wireless Router (WBR2310) "wrong ip adress" Questions

...WRONG? THANK YOU FOR YOUR VALUE HELP. first click start in the computer then click run then type CMD then the dos modebox will be seen then type ipconfig then you will see ip adress of the network to ...

...wrong ? You may have to set a static IP adress in your ipod. you can find the proper settings to use by looking at the Wireless connection status on your laptop. It will show you the current IP ...

...ip's might be 192.168.123.254 or 192.168.2.1. If you have the right adress make sure there is nothing wrong with the cable you are using. But since I'm guessing you can connect to other pages I would ...

IP when really the wrong key was entered. I recommend: 1. Ensuring you have the latest firmware (microcode as you call it) 2. Enable WPA2 and a new wireless key 3. Enter in the new key on the computer

...ip adress for the router 192.168.0.1 I get an error message "503 service unavailable" after trying over and over I finally reached the login page, but when I logged in it said "the network is down" ...

...wrong option. This is not Chat but let me give you the instructions on how to get your prints working on both macs. First of all check the ip address of the mac. Check it on both macs. To do that ...

wrong and what is the solution? I am sure most of you must be thinking that I should get my IP address and Subnet mask from my ISP and enter it under the 'Static IP' choice but when I am not using the

...and check the assigned "ip" address. If your copy unit is set to dhcp then all that might be wrong is that the address has changed...you print to the asigned adress that gets set up on the

...IP in the wrong network range, no default gateway (like a room with no out door), and no DNS. We had to manually configure it. I believe my router is going to be with our lord soon. If you go into ...

...wrong with the IP info you have inside the router, or your computer isnt configured properly for wireless, in which case, just let me know and i will gladly walk you through the process of ...