GE Nautilus 24" Built-in Dishwasher "lower arm assembly" Questions

lower wash arm assembly. If the lower wash arm isn't getting water, all of the dishes in the lower rack will come out dirty. Check to be sure the lower wash arm assembly spins freely. Also check to be

...lower wash arm assembly without breaking plastic connection there should be a clip half way up the back and on the top. release those and the old tub should come out with out to much difficulty. the ...

...lower wash arm is assembled. When you reassemble the unit, tighten to just that amount. (If you overtighten it, the wash arm will not turn and completely clean the dishes.) I hope this helps. Cindy ...

...Lower wash arm KitchenAid lower wash arm assembly was loose and making noise. When I jiggled it the entire arm came off and it can not be screwed back in place. if its a newer model the sprayer sits ...

lower spray arm gets stuck Had to unscrew tower assembly &take out spray arm to clear cherry seeds blocking holes. After putting assembly back in it doesn't sit right. Longer portion of spray arm hits

leaking. You may have to remove the lower rack, lower wash arm and cover to see. If everything is clear, it could be a worn or damaged pump impeller. If the machine drains normally, it's not the motor

...lower spray arm/tower assembly may be broken. The tower assembly gets struck in the lower rack. It's not going up as it should and falling over. I'm thinking the it needs to be replaced but am not ...

...lower spray arm should give you access to assembly if needed. OR there is a filter in the pump area that is probably plugged which is affecting your pressure during wash and rinse. It needs to be ...

...lower wash arm is not spinning. I have disassembled everything that I could below the lower wash arm and cleaned the mineral deposits and old detergent residue off of everything. I have re-assembled ...