Question about Yamaha Audio Players & Recorders
...yamaha p3500s power amp won't turn off When I turn my yamaha p3500s power amp on the protection light comes on and won't turn off and won't push no sound. need replaced power output take it to a
...power relay) off after two seconds .Protection (DC PROT} 0% indicate When Push Test button. There are, at the very least, a few different types of protection, DC Offset, Thermal Overload, or simply a ...
remote? Unit is always in stand by mode. If pushing the power button does nothing, the unit is probably in "protect mode". This means there is an internal problem and will require professional service
...push the power button to turn it on and it stays on for about 3 seconds and then go's off. Hi sexybeautyed The unit is going into protection mode. It has an internal fault that is forcing the unit to ...
...push power, protect. we have taken the unit apart to see if there is anything obvious but all we found was that it was covered in dust. can you help? The 'protect' message indicates that the units ...
Question about Crown Audio Players & Recorders
...push the amp to deliver more power. If the amplifier fan is not functioning, you may be in a thermal shut off mode that protect the amp from overheating by shutting off any signal. My advise would be ...
Question about Behringer Audio Players & Recorders
...power stage is full wave rectified to illuminate the LED, d-c is presented to the LED if R128 & R138 has an a-c return. There is a line that can push-up the a-c return. It goes off to a connector ...
Question about Sony Audio Players & Recorders
...push power protector what section maybe damage is it in power supply pls help and which component must be change Could be none of the above. More diagnosis is called for. Generally speaking, an amp ...
...push the power button on it turns off instantly.Can you help me solve my problem? Without the make and model of your unit, it is impossible to provide usefull information. In general, the following ...
...push the power button it's supposed to turn red and power up. Sometimes the unit is in standby and the power button doesn't turn it on. Sometimes the opposite... the unit is powered on and the button ...
5 questions posted
Usually answered in minutes!
86 Questions
43 Questions
23 Questions
17 Questions