...Paper can be pulled apart, ,but that defeats the purpose. Thank you for your thoughts! Your cutters have spread apart this could be caused by overloading machine to many times or something may have ...
...apart to remove the paper jam? Throw it out and buy a new one! staples won't replace this unit and your gonna have to take it apart and clean the gears. Also tell your employees to stop reversing the ...
...switch and install it? Thanks, Frank Try running it backwards to clear the paper shreds. If that does not work, you will have to take it apart to clean out any paper that has gotten into the
...PAPER JAMMED If you can, I can show you how to remove the jam. Machine had to be taken apart. If you are not a tech. this will take you some time.I can work with you on phone. Thanks and good ...
...paper sensor its possible the sensor has gone bad you will need to UNplug the unit , then take it apart 9 screws then gently pry it apart with a screwdriver or butter knife you could test this with a ...
...help. Thanks There are LED photo sensors in the feed path that detect paper. They can get a build up of paper lint or oil on them. The shredder needs to be taken apart and these need to be
...paper to shred, there seems to be something obstructing the left side, but if I angle it in to the right side, I can then slide it over so the left accepts it. I've lost my manual. I think I could ...
Question about Office Depot Office Equipment & Supplies
paper-shredder-c31646.html?page=2 You might have to take it apart (which is hard) - but first:- 1. Try letting it cool down - up to an hour. 2. Use a combination of a small bladed screwdriver and long
Question about Aurora Electronics Office Equipment & Supplies
paper back out. If not try running it again. If this still does not work then you will have to physically take the shredding unit apart and dismantle it until you can get to the papers that are jammed
56 questions posted
Usually answered in minutes!
70 Questions
59 Questions
51 Questions
53 Questions
35 Questions
