Kenmore 13742 / 13744 / 13749 Built-in Dishwasher "remove protector inlet" Questions

...inlet protector. The two screws and the foreign object protector have been removed, but the inlet protector seems stuck in place. Is there a trick to pulling it out? Thanks for your help, Steve Hi ...

inlet in front of the "chopper". Remove the lower arm and upper arm supply tube. Remove the screws then remove the screen, accumulator and inlet protector. You should see debris in front of the screen

...Remove the torx screw and the inlet protector that covers the chopper assembly. Make sure the chopper is not broken (broken chopper will fill with debris and block water flow). While holding the ...

...Remove the torx screw and the inlet protector that covers the chopper assembly. Make sure the chopper is not broken (broken chopper will fill with debris and block water flow). While holding the ...

pdf. The inlet protector was especially difficult to get off, but I was able to pry it off to expose and remove the chopper assembly. I cleaned all the parts I removed really well before re-installing

...Remove the torx screw and the inlet protector that covers the chopper assembly. Make sure the chopper is not broken (broken chopper will fill with debris and block water flow). While holding the ...

...Remove the torx screw and the inlet protector that covers the chopper assembly. Make sure the chopper is not broken (broken chopper will fill with debris and block water flow). While holding the ...

...Remove the torx screw and the inlet protector that covers the chopper assembly. Make sure the chopper is not broken (broken chopper will fill with debris and block water flow). While holding the ...

remove the inlet protector (chopper) from a Kitchenaid KUDS01IJ? Hi, Here is a link to some instructions I put together to clean out that area. Take a look and let me know if it is helpful. http://www

INLET PROTECTOR Hi, I can't take off the inlet protector. I took off the two screws, but the inlet protector don't move when I try to take it of. I tried to move it with a screwdriver but i'm afraid ...