Question about Western Digital Caviar Computers & Internet
...second hard drive to the second IDE controller instead on the first controller. If there aren't any drives on the second ATA cable then the second hard drive can be jumpered as either a Master or ...
...hard drive that connects to your computer's motherboard. It is even possible to connect multiple drives to the same computer; however, only one drive can be the master hard drive; the other(s)
...an identical disk-drive, split the "electronic" circuit-board from the "spinning" part, on both drives, and then connect the "good" circuit-board to your disk-drive. Then, you can access your ...
what is the jumper setting for wd200bb 20gb hard drive for slave Slave - Installing the new drive as the secondary drive: If installing your new Western Digital hard drive as the secondary drive on ...
What to delete from C:\ drive? Upon installing my external drive some 6 month ago, I have copied my entire system to the external drive "F". I have also moved almost all "My Documents" to "F". However
Question about Western Digital Caviar Computers & Internet
...The Western Digital hard drive is factory set for single drive installation. Western Digital hard drives are shipped with a jumper in the neutral storage position (across pins 5 and 3) for future ...
Question about Western Digital Caviar Computers & Internet
My computer doesn't recognize my hooked in to 3.0 USB port on my ASUS laptop, initialized, SATA 2TG internal drive that's within an external case. Does it need to have a Drive name?? & How do I give a
...proves 2 things. 1: power makes it to the HDD digital chips/ 2: and those chips can PNP report the drives spec and ID. it does not prove the drive works, only that it can talk. see? 3: if you get it ...
dead hd wd caviar 80 gb how to replace the hardware driver of the harddisk ( sata ) Is the "dead" hard drive 80GB? or 500GB? I presume you set up this hard drive as the second hard drive, or as an ...
Question about Western Digital Caviar Computers & Internet
...to have the pin set to primary and the secondary set to slave, if you're running both of these drives off of the same ribbon cable. You may have to go into your BIOS settings and check to make ...
40 questions posted
Usually answered in minutes!
35 Questions
30 Questions
25 Questions