Question about Brother MFC Office Equipment & Supplies
print unable 51 code on brother MFC-5460 CN paper jam or some sensor error, try to clean the sensor, locate the sensor under the pump, where the printer head park the dis assemble and get the sensor, ...
location. The entire paper path must be checked for any pieces of paper. To stop the message, open and close the top most cover of the printer. Lastly, verify the flags and the sensors. If the problem
location. The entire paper path must be checked for any pieces of paper. To stop the message, open and close the top most cover of the printer. Lastly, verify the flags and the sensors. If the problem
...MFC-6800 machine error AE. No printing same problem called brother and they said it was the ccdhp sensor which was in off position and must be in on position They couldnt tell me where teh sensor ...
...and the the 2700 works with the old 9420's opc belt but the 9420 again say no opc belt. The opc sensor is not sensing the belt. Open the front cover and remove all the toner trays. You will see ...
...paper jam message. There is not any paper jammed inside the printer. Please help. Probably a jam sensor is dirty or stuck. Look through the paper path for a stuck plastic sensor arm, or dirt or ...
Question about Brother MFC Office Equipment & Supplies
location information. 01 resets every thing to factory. DO NOT CHANGE ANYTHING IN MAINTENANCE MODE. CCDHP is scanner home position sensor. It will probably reset just by turning the machine off and on
...in their i was printing some papers then i turned of the printer and no papers where in therw The sensor on the motherboard has possibly failed. when you close the back cover an arm on the inner ...
the printer is out of ink this is the type i have which is a brother 240cMFC try to replace new cartridge, if the error still the same, clean the sensor located at the cartridge assembly
Question about Brother MFC Office Equipment & Supplies
...put it back in. I found that removing and reinstalling the drum solves a lot of print problems. The sensor for the back door is directly located on the underside of the motherboard. Check whether the ...
936 questions posted
Usually answered in minutes!
1,135 Questions
1,012 Questions
623 Questions
406 Questions
381 Questions