Brother MFC 240C All-In-One InkJet Printer "rebooting computer" Questions

Hi I have a new brother printer and it was working fine. I have gone to use it again and it keeps saying the printer is offline...yet I have registered again and everything is the same. Help check ...

...Rebooting the computer OR printer individually does no good, but if I reboot them both together, it fixes the problem temporarily and I can print for some time before it goes down again. I replaced ...

will not print from computer vAgain the information provided is not sufficient. However, you can re-install the drivers for the printer and check. Follow the steps: 1. Disconnect the printer from the ...

Brother MFC-J630w. "CC3-114-04001704". Cannot operate any functions from PC (connected via USB) or scan from hardware. Gives me an error code "CC3-114-04001704", along with a message that says "Failed

MFC 790CW can't cancel my print request This is a Very Common Problem. Two Ways... The first is easiest, but doesn't always work: Reboot Computer and Reboot Computer (works sometimes) Windows has had ...

Trying to scan and it says connecting to PC but nothing happens. It will print Sounds like it is in the scanner software you re using. I would uninstall the software and printer, turn it off and ...

my brother printer240C had a paper jam . I took all the paper out of the paper jam but the machine tells me that their is still a paper jam so what do I do? hello Just a checklist: have you tried to ...

I have windows vista and mybrother MFC-240C won't print, Says can't find printer? Are you using the vista driver as found here first unplug ur usb cable from ur mfc-240c than deinstall all drivers of ...

Can't print from my computer on mfc j410w Please follow the steps below: 1. Disconnect the mfc from the computer. 2. Uninstall it through Control Panel->Add Remove Progs. 3. Reboot. 4. ...

I am trying to scan and fax a paper and it is asking for me to check connection Check both ends of the USB lead are firmly in place in the scanner and at the computer. Turn off the MFC-4200, leave 10 ...