clear fuser life warning C524 How do you clear the fuser life warning message on a Lexmark C524? Replacing the fuser When 80 Fuser life warning appears on the operator panel, replace the fuser soon. ...
Question about Lexmark C Office Equipment & Supplies
i have a c920 lexmark with a fault code 920.000. my guess is that the fuserisnt heating up... based on the fact that its not getting hot... im guessing the fuser lamp has blown.... is there any other ...
Question about Lexmark C Office Equipment & Supplies
...to get a good copy, as the color just runs down page Just solved the same problem. Mine was the fuser. It is either the drums or the fuser. Print something with color then turn machine off before ...
928 FATAL ERROR What can I do , inside ...? Fuser Motor Lock Error The fuser is not operating properly Check to confirm that the fuser is in position. Replace the fuser. Replace the fuser motor.
paper stuck in fuser I had a paper jam and when I pulled the paper from the fuser, some pieces got stuck in the fuser. There's no way to reach them to get them out. What do I do? Pull fuser out Should
i have an error message 120.10 service fuser error, what does this mean?...Service Fuser Error appears when the fuser does not warm to the required temperature to operate properly. For this error on ...
My printer is displaying the following message - 122.03 Service Fuser Error. Can you tell me what this means? This means the fuser unit is defective and needs to be replaced. Depending on your ...
Time to replace fuser? I just bought a new fuser for our printer, but the online stats say the current fuser is only 65% used. We have been having some problems for awhile with it printing two copies ...
...else with it. I have tried turning it off and unplugging it but it doesn't seem to help. A bad fuser connection can cause 920.8 service error. I would advise to check and reseat the fusing unit. ...
Question about Lexmark C Office Equipment & Supplies
I have an Oki c9300, the paper travels as far as the fuser unit, then jams. Remove the fuser and make sure the sensor below the fuser is still in place. If it and the paper is stuck inside the fuser ...
57 questions posted
Usually answered in minutes!
232 Questions
138 Questions
65 Questions
57 Questions
64 Questions