Question about Computers & Internet
...off an old WDE 4630 hard drive that I removed from my old Micron PC (circa 1997). The drive has a SCSI 50 PIN Male connector. I need an IDC50 FEMALE adaptor that also has a USB connector to allow
Question about Maxtor Computers & Internet
...by Windows XP installation CD, when the message "Press F6 if you need to install a third party SCSI or RAID driver" shows up, press "F6". Then, press "S" to specify additional device when next ...
Question about Western Digital Computers & Internet
...manual for connector locations). Host adapter configuration is shown below.Note: Serial ATA connectors are keyed to ensure correct orientation. 2. Attach the ...
...manual. If you want to use a hub instead of a cross over cable, get a 100Mbit hub. You can put this drive in a USB enclosure but it will be slower that over the network. The drive could be ATA (IDE ...
...into 5 drives of about 100MB. This would be the ideal solution. You did not mention the type IDE, SCSI,PATA,ATA-100, ATA-133 drive you upgraded. Sometimes if you use the old IDE cable you do not ...
Which SCSI Cable does it take? Is a manual available? not information made available to answer
Question about Acer Computers & Internet
...SCSI drive. I dont have users manual for this drive so would appreciate if someone has a copy or can suggest where a copy can be obtained Thanks! first of all SCSI drives are not configured as Master ...
343 questions posted
Usually answered in minutes!
1,198 Questions
326 Questions
