Ingenico eN-Touch 1000 Digital Pen "2 tablet booting" Questions

Any help would b much appreciated thank you Hello, You can buy serial to USB adapters as well as ps/2 to usb adapters. This may or may not work though. It depends on how the drivers were designed. Its

Pen writes in one spot, but image shows up 1/2 below..... Wondering if there is some type of calibration that can be done. The pen writes in one spot on the screen, but the actual text shows up about ...

2 - and in desperation I called them today and they were incredibly helpful, didn't seem to care that my tablet was a dinosaur. Wacom said that there's a sensor inside the pen and if it receives rough

...this can also contribute to the problem. 1. To calibrate the ENTouch 1000 power off the device. 2. Prior to restoring power touch the pen to the center of the screen and do not move it. 3. Power ...

...master (w/ OS X 10.4), and just installed a Western Digital hard drive as slave (partitioned into 2 drives: one with OS X 10.4.11 and the other with OS X 10.5.8). Having problems when both are ...

...Tablet. It turns out that it isn't because of the keyboard bracket causing hairline fractures on pcb but the bga connections of the graphics card. A simple session of solder reflow for the main board ...

will not connect keeps saying numbers dont match what connection and numbers what numbers are you referring to ? internet connection ? You will have to open up your network connections Click start ...

...2 Graphics Tablet, Model XD-0912-U, that does nothing when connected to any Mac computer running OS 10 (I've tried several computers). The tablet worked one time only when it was brand new. ...